Austin's cedar fence builder for privacy that lasts.
Cedar privacy fences, horizontal slat builds, custom gates and split-rail Hill Country fences. Built right, the first time, across greater Austin.
- Free on-site estimates
- HOA submissions handled
- Written warranty
What a privacy fence costs in Austin
Fences are priced per linear foot, and the style you pick moves the number more than anything else. These are the ranges JB is quoting around Austin, installed.
| Fence style | Per linear foot, installed | Typical 200-foot backyard |
|---|---|---|
| Side-by-side cedar (standard privacy) | $32 to $48 | $6,400 to $9,600 |
| Board-on-board (overlap, no gaps) | $38 to $55 | $7,600 to $11,000 |
| Shadow-box (good from both sides) | $40 to $58 | $8,000 to $11,600 |
| Horizontal cedar (modern look) | $48 to $72 | $9,600 to $14,400 |
| Split-rail / ranch cedar | $22 to $38 | $4,400 to $7,600 |
Gates, steel posts, stain and difficult terrain are the usual add-ons.
How a JB fences project goes
Free on-site measure. We walk the line, check the survey and easements, and talk through style, height and posts.
Line-itemed quote. Material, posts, gates, tear-out and haul-off, stain, all separated so you can see what each choice costs.
HOA submission. Prepared and submitted for you where your neighborhood requires it.
Tear-out and post setting. Old fence hauled off, new posts set to depth and left to cure.
Rails, pickets, gates. Then a magnet sweep and a walk of the whole line with you.
Most residential fences are finished in 2 to 4 days. Acreage and split-rail runs take 1 to 2 weeks.
Fence repair
Not every fence needs replacing. A leaning run usually means a few posts have rotted at ground level.
